The Asus ROG Strix Radeon RX 5700 XT is likely one of the maximum top rate customized RX 5700 XT fashions round, pairing a top-end PCB with the corporate’s beastly bespoke cooler and a hefty overclock. However it’s been plagued through a worrisome factor: overheating. A large number of patrons have reported that the cardboard runs sizzling, and after BIOS updates failed to mend the fear, Asus is now blaming AMD’s design tips for the problem. Thankfully, despite the fact that, there’s (in spite of everything) a repair.
The ROG Strix Radeon RX 5700 XT’s woes had been well-chronicled through Unboxed within the video beneath. In brief, the screws mounting the cooler to the cardboard weren’t became tightly sufficient, resulting in higher-than-expected temperatures, and for the reason that Strix’s customized cooler is so heavy, gravity can probably make the issue worse over the years. Customers discovered that tightening the screws or including washers to extend power may fortify thermal efficiency.
Having to jerry-rig one thing in combination to get first rate efficiency from your $400-plus graphics card is a bummer, to mention the least, particularly in probably the most dear fashions to be had.
In a submit printed Friday afternoon, earlier than a protracted vacation weekend within the U.S., Asus showed the problem and mentioned AMD’s design tips are in charge. Overclock3D reported the inside track first. It’s value noting that this isn’t a fashionable factor with customized Radeon RX 5700 fashions from different firms, and the ROG Strix packs a far beefier design than maximum graphics playing cards.
Asus claims AMD’s tips mentioned to mount the cooler at a PSI of 30 to 40. After appearing further trying out within the wake of consumer court cases, Asus says it found out that the optimum vary for its Radeon RX 5700 graphics playing cards is in fact between 50 and 70 PSI. “In consequence, all ROG Strix Radeon RX 5700-series graphics playing cards shipped from January 2020 ahead function new screws that build up cooler mounting power to 50-60 PSI, leading to advanced warmth switch from the GPU to the heatsink,” the corporate says.
Should you’ve already purchased a ROG Strix RX 5700-series GPU and wish the more recent mounting screws, you’ll touch an Asus carrier heart beginning in March they usually’ll switch the hardware out for you.
Seriously, Asus’s trying out discovered expanding PSI previous 75 PSI exceeds the specs it recommends, so appearing at-home changes may finish up negatively affecting efficiency. When Unboxed tightened the cooler on its Radeon RX 5700 XT, it discovered that the GPU’s reminiscence temperatures skyrocketed, despite the fact that to not dangerously top ranges. It is still noticed if the brand new Asus specs be afflicted by the similar factor or if the 50 to 70 PSI equipped through the brand new mounting hardware is simply sufficient to deliver GPU temperatures down with out affecting the reminiscence.