How to access your router settings and update its firmware

Routers are a surprise of contemporary era, in a position to glue an entire ranking of family gadgets—stressed out and wi-fi—to the web. As the center-piece of your house community, you will have to understand how to mend your router while you lose your connection, replace its firmware, and optimize its settings.

The Entire Information to PC Gaming

PC Gamer goes again to the fundamentals with a chain of guides, how-tos, and deep dives into PC gaming’s core ideas that we are calling The Entire Information to PC Gaming. There may be a lot more to come back, and it is all being made conceivable via Razer, which stepped as much as improve this months-long challenge. Thank you, Razer!

In each and every router lives a complete purpose-built laptop, whole with a processor, garage, RAM and an OS. When you find yourself having an issue, the primary troubleshooting step is to reboot each the cable modem (or optical community terminal for the ones lucky to have an optical fiber connection) and the router. Additionally, ensure that all Ethernet cables are absolutely plugged in with clips seated, connecting each the router and modem in combination. As well as, take a look at that the right ports are used, akin to that the Ethernet cable from the modem is going into the WAN port of the router.

Make sure you whole the opposite troubleshooting fundamentals, together with ensuring that your modem nonetheless has a sign out of your ISP. If this exams out, you will have to additionally understand how to modify your router’s settings, replace its firmware, and reset it if want be. Beneath, we have detailed how to do this for some in style router producers. 


On the best finish of the Asus line of routers is the GT-AC5300, the 2017 PC Gamer Router of the Yr, in addition to the extra reasonably priced however nonetheless gaming centered RT-AC86U.

To login into the router:

  • Default IP cope with:
  • Default username: admin
  • Default password: admin

That is fairly unsecure, so that you will have to alternate each the username and password on the earliest alternative.

On Asus routers, the firmware model is displayed on the best of each and every display, with an exclamation level in yellow if a firmware improve is to be had. 

To maximise bandwidth on more recent gadgets, make sure to head over to the ‘Wi-fi’ phase and make a selection the biggest quantity for bandwidth to maximise throughput: 40 MHz for the two.four MHz frequency, and 80 MHz at the five GHz frequency.


For a extra reasonably priced upper finish router, the Linksys WRT32X is still prized for its integration with the Killer Prioritization Engine.

To interface with this Linksys equipment:

  • Default IP cope with:
  • No username
  • Default password: admin

The firmware improve interface is beneath the heading ‘Router Management’ at the house web page. Then scroll down after ‘Common’ to ‘Firmware.’ If the newest firmware is put in, it is going to point out ‘Up to the moment,’ and if no longer ensure that the router is ready to replace nightly, or you’ll be able to manually add the report. Sadly, there is not any technique to simply have it replace now mechanically.

Subsequent head to ‘Wi-Fi Settings,’ and click on on ‘Extra settings,’ which opens up further choices. Right here you’ll be able to make a selection to maximise the channel width, which is 40 MHz at the 2.four GHz frequency, and 80 MHz at the five GHz frequency.


Netgear stays a well-liked router selection, with contemporary efforts together with the Nighthawk Professional XR500 and XR700 fashions.

The default Wi-Fi password is on a decal at the best or backside of the tool. The default login for those fashions is:

  • www.routerlogin.web
  • Default username: admin
  • Default password: password

Once more it will have to be the primary order of commercial to modify those defaults to one thing extra protected.

As soon as within the router, ‘Firmware Replace’ can also be discovered beneath the ‘Management’ phase, which is able to take a look at mechanically for you if there’s an improve.

Additionally, head on over to ‘Setup’ after which ‘Wi-fi Setup’ to maximise the throughput speeds, which for the XR700 are 800 Mbps at the 2.four GHz, and 1733 Mbps at the five GHz frequency.

The TP-Hyperlink Archer C5400X is on the height of the corporate’s  gaming routers, even supposing its decrease routers, such because the Archer C7 and the Archer C9, are persistently in style funds alternatives amongst players and nongamers alike.

To get right into a TP-Hyperlink router:

  • Default IP cope with:
  • Default username: admin
  • Default password: admin

Once more, sure, they will have to each be modified.

The firmware improve is rather hidden at the C5400X, and that’s doubly compounded that it does no longer mechanically replace, and must be manually prompted. Alongside the highest, first pass to ‘Complex’ which permits extra choices to be decided on. Then scroll down at the left to the remaining choice referred to as ‘Machine Gear,’ the place the suboption of ‘Firmware improve’ might be discovered because the 4th choice, and make a selection it. This may get you into the firmware interface. Hit ‘Take a look at for improve,’ and if there’s a more recent model, the router will snatch it.

The C5400X may also be optimized for channel width. Once more, it’s beneath the ‘Complex’ tab at the best, after which at the left sided panel select ‘Wi-fi,’ after which ‘Wi-fi Settings.’ Click on at the channel width and select the biggest quantity, and notice that this can be a tri-band router, so this wishes additionally to be finished for two.four GHz, in addition to the twin five GHz frequencies. 

If not anything else works

In case your router’s settings are tousled past a very simple repair, or when you’ve modified the default password, forgotten the brand new one, and now merely can not get in, then a manufacturing facility reset is your very best transfer. To try this, maximum routers have a reset or repair button someplace at the again, which you will have to press and grasp for 10 to 15 seconds. (A paper clip may well be required if the button is recessed.) This resets the router’s OS again to manufacturing facility settings, at which level you’ll be able to continue with an preliminary setup and configuration. 

Leave a Reply

Your email address will not be published.