Oculus Rift S guide: Fixing tracking problems and blackouts

The Oculus Rift S was once launched this week. Alternatively, some house owners are experiencing monitoring issues and different USB comparable problems corresponding to blackouts.

The Rift S makes use of 5 onboard cameras for monitoring. Whilst some preprocessing appears to be completed at the headset, the Rift S nonetheless pushes USB three.zero to the bounds. USB three.zero is a broadly used usual, however now not all USB three.zero controllers correctly make stronger it. Which means some motherboards can have problems.

In the event you’re having monitoring problems such because the headset or controllers freezing in position, otherwise you’re experiencing periodic “blackouts”, take a look at this kind of 5 possible answers. We propose attempting them so as, as we’ve ordered them from the least time & effort required to essentially the most.

Flip off USB energy control

Home windows has a function which cuts energy to USB ports it doesn’t assume are getting used. The issue is, on occasion this triggers a false sure and shuts down the USB port your VR headset is the use of.

To search out the whole environment for this, seek for ‘Edit energy plan’ within the Get started menu. When it opens, click on ‘Trade complex energy settings’:

Now increase USB Settings and switch off USB Selective Droop:

Subsequent you’ll wish to disallow Home windows from turning off the Rift S particularly. Proper click on the Get started button and click on ‘Software Supervisor’. Amplify ‘Common Serial Bus controllers’ and proper click on every example of ‘Rift S USB Hub’ then open Houses.

Within the Energy Control tab, uncheck ‘Permit the pc to show off this tool to avoid wasting energy’:

You must additionally do that for all Hubs with ‘three.zero’ or ‘SuperSpeed’ within the identify, corresponding to ‘Fresco Common sense USB three.zero eXtensible Host Controller’.

Take a look at each USB port

Virtually all motherboards have a couple of USB controller. Other USB ports on it can be attached to other USB controllers.

One of the simplest ways to determine which USB controller will paintings is to easily take a look at plugging the Rift S into each USB port and seeing which has problems and which doesn’t. Surprisingly, one person had good fortune with plugging it into USB 2.zero for round 30 seconds after which again into USB three.zero.

It’s possible you’ll wish to take an image together with your telephone every time you exchange the port to extra simply take into account which of them you’ve already attempted.

Notice that you simply must additionally disconnect and reconnect the DisplayPort cable each time you turn USB port.

Reseat the cable

Whilst it’s going to appear laborious to consider, some problems are simply led to by means of the cable being unfastened. This may also be both at the PC finish or the headset finish.



At the headset finish you want to detach the facial interface to get right of entry to the cable.

Be sure you disconnect the cable for 5 seconds sooner than plugging it again in. This must even be completed at the PC finish, and right here the USB port must be plugged in for 5 seconds sooner than the DisplayPort.

Restore the Oculus instrument

Some monitoring problems are in truth led to by means of a corrupt set up of the Oculus instrument. This may also be solved with a restore.

  1. Move to oculus.com/setup
  2. Click on ‘Obtain Oculus Rift Device’ then run the downloaded report
  3. Click on Restore

Don’t fear, your Rift video games and save knowledge must be unaffected.

Nonetheless having problems?

In the event you’re nonetheless having problems, your highest wager is to create an in depth price ticket with Oculus Reinforce, together with your Rift logs. Oculus has a discussion board submit explaining  acquire those logs right here.

This tale at the start seemed on Uploadvr.com. Copyright 2019

Leave a Reply

Your email address will not be published. Required fields are marked *